ALFA 25 S

Specification of the machine

A cutting automatic machine model ALFA 25 NC is designed for cutting of aluminium lamellas in production of horizontal window blinds and their simultaneous stringing into short ladders with by hand release of stringing racks. An aluminium lamella in width of 25 mm, thickness 0.16 to 0.22 mm is the basic current material. Some types of lamellas with thickness of 0.22 mm require exchange of shaping wheels. The machine is constructed in such a way so as the inter stage times for band exchange (colour substitution), setting of the lamella dimension, the ladder exchange handling with a cut blind etc. would be decreased.

All work stages are controlled by an industrial computer. All required dimensions of the blinds are entered in it. The dimensions can be entered in two different ways. Manually, directly on a key-board or automatically through transmission from the system of the customer.

Machine features:

• Chamber on 1 roll
• Hand feed of threading racks
• An easy and quick ladder exchange
• Automatic stringing into short ladders
• Sophisticated statistic function
• Machine diagnostics by means of the screen or a modem
• Industrial PC
• Quick setup of blinds dimensions
• An easy exchange of tools with an allen key

Technical data:

Max. depth:

600 mm

Machine height:

1900 mm

Total length:

4100 mm

Power input:

1500 W

Supply voltage:

3x 400 V AC/50 Hz

Operating pressure:

6 Bar

Air consumption:

160 l/min.

Noisiness:

90 dB (the maximum limit set by the standard is 95 dB [A])

Number of punching stations:

2 pcs.

Number of cutting station:

1 pcs.

Number of threading stations:

4 pcs., maximum 7pcs. of station on customer’s request

Max. Slat length:

2250 mm, maximum length on customer’s request